Configuring Multi-hop BFD

Multi-hop BFD helps a device rapidly detect faults in a multi-hop link on a network.

Usage Scenario

To monitor IP route forwarding continuity, configure multi-hop BFD.

Pre-configuration Tasks

Before configuring multi-hop BFD, complete the following tasks:

  • Set link layer protocol parameters for each interface to ensure that the link protocol status of the interface is Up.

  • Assign an IP address to each interface.

  • Configure a routing protocol to ensure that the network layer is reachable.

Copyright © Huawei Technologies Co., Ltd.
Copyright © Huawei Technologies Co., Ltd.
< Previous topic Next topic >