Configuring NMS-based Correlative Alarm Suppression

This section describes how to configure NMS-based correlative alarm suppression. This function enables the system to filter out NMS-based correlative alarms and only reports root alarms to an NMS.


  1. Run system-view

    The system view is displayed.

  2. Run alarm

    The alarm management view is displayed.

  3. Run correlation-analyze enable

    Alarm correlation analysis is enabled.

  4. Run alarm correlation-suppress enable target-host ip-address securityname security-string [ vpn-instance vpn-instance-name ]

    NMS-based correlative alarm suppression is enabled.

Copyright © Huawei Technologies Co., Ltd.
Copyright © Huawei Technologies Co., Ltd.
< Previous topic Next topic >