Configuring Alarm Inversion

If you do not want an interface to generate loss alarms for services that have been deployed but not accessed, configure alarm inversion.


  1. Run system-view

    The system view is displayed.

  2. Run alarm

    The alarm management view is displayed.

  3. Run reverse mode auto-resume

    The alarm inversion mode is set to automatic recovery.

  4. Run reverse

    The alarm inversion view is displayed.

  5. Run reverse interface interface-type interface-number

    Alarm inversion is enabled on an interface.

  6. Run commit

    The configuration is committed.

Copyright © Huawei Technologies Co., Ltd.
Copyright © Huawei Technologies Co., Ltd.
< Previous topic Next topic >