The device can be configured to send specified traps to the NMS, which facilitates fault locating. To enhance the trap transmission security, specify parameters for sending traps.
The system view is displayed.
The device is enabled to send traps to the NMS.
The device is enabled to send a specified trap of a specified feature to the NMS.
To disable the trap functions of all modules, run the snmp-agent trap disable command.
To disable the trap function for a specified module, run the undo snmp-agent trap enable feature-name command.
To delete all the trap function configurations of a feature in a one-click manner, run the clear configuration snmp-agent trap enable command.
A source port number is specified for traps.
To improve network security, configure a specific source port number for traps. After that, the user terminal's firewall filters packets based on the port number.
The format of traps sent to the NMS is set.
In VS mode, this command is supported only by the admin VS.
The configuration is committed.